Skip to content

ECU repair · Goose Green, Wigan

ECUs repaired, not just replaced

Failed engine ECUs and control modules come out of the car and go on the bench: repaired or cloned, then programmed back in. It is usually quicker and cheaper than a new unit that would need programming anyway.

  • Repaired on the bench
  • Cloned where repair is not the answer
  • Programmed back into the car
A control module's circuit board wired to a programmer and magnified on a digital microscope, on the AMD workbench

Repair or replace

Why a new unit is rarely the cheap option

A replacement ECU or module is not plug and play. It has to be programmed to the car, and sometimes the car has to go back to a main dealer for it. Repairing the original, or cloning it onto a replacement, keeps the car's own software and settings.

The work is done in the workshop, under a digital microscope, by the same people who diagnosed the fault in the first place.

How it works

From fault to refitted

  1. 01

    Confirm the fault

    We prove it is the module, not the wiring or a sensor, before anything comes out of the car.

  2. 02

    On the bench

    The unit is repaired, or its data is cloned onto a replacement.

  3. 03

    Programme it back

    The module is refitted and programmed back into the car.

  4. 04

    Test and hand back

    We prove the fix on the car before you collect it.

Google reviews

What customers say

Rated 5.0 from 20 reviews on Google. More reviews

Went around the block trying to get my car fixed also spending a small fortune with the issues never going away. AMD took my car in without waiting. Within 2 days my car was as good as new.
Antony H. Google review
After many let down mechanics and endless garage visits I was recommended AMD, my Subaru was left for an hour and the problem was sorted. These lads know their stuff …
Ben C. Google review
These guys are legends, their knowledge is unbelievable. Nailed my issue with my WRX whilst I was visiting Wigan.
Chris L. Google review

Questions

ECU repair, answered

Often, yes. We repair and clone engine ECUs and control modules on the bench and programme them back into the vehicle, which is usually quicker and cheaper than a new unit.

Copying the data from the car's original unit onto a replacement, so the replacement works with the car as the original did.

Often you do not, which is why we diagnose first. Many faults blamed on an ECU turn out to be wiring, a sensor or software. See car diagnostics.

It depends on the unit and the fault. Ring the workshop with the make, model and symptoms and we will explain what is involved.

Tell us what the car is doing

Ring or send the make, model, the symptoms and any fault codes. We will tell you whether it looks like the ECU and what is involved.